FROM BOX TO BATHROOM - THE BASICS OF SHOWER UNIT INSTALLATION

From Box To Bathroom - The Basics Of Shower Unit Installation

From Box To Bathroom - The Basics Of Shower Unit Installation

Blog Article

Free Estimates



The writer is making a number of great pointers regarding How to Install a Direct-to-Stud Shower Enclosure in general in this article down the page.


How to Install a One-Piece Shower Unit
An effective shower installment calls for cautious planning and also a lot of work. In most cases, you will require to do three types of tasks: mounting wall surfaces, setting up the plumbing, and also ending up wall surfaces.

Prep work


Firstly, you should choose the sort of shower that you desire to install. It is essential to establish whether the selected shower is capable of coping with specific systems and can control a safe level of water via the boiler. Many shower devices nowadays are created to be flexible to various water stress (such as stored hot water and chilly mains).
It is also vital to take into consideration the water pressure and also the preparation of the piping and also water drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The pipe and also spray parts of the push-on mixer shower unit can be attached to the bathroom faucet as per your requirement, and the water temperature can be changed via the faucets. Push-on mixers are cheap as well as incredibly straightforward to set up. However, although the hose link is easy, it is quickly removed. In addition, it is inconvenient to change the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this type of shower are incorporated with a bathroom mixer tap, as well as the temperature can be readjusted with the bath faucets. It is a very affordable option as well as no extra plumbing is included. However, the bath/shower mixers also experience inconvenient temperature level control options.

  • Guidebook Mixer: The tube and spray of a hand-operated mixer shower unit belong of the wall device as well as the cold and hot water products are linked to a solitary shutoff The temperature and pressure of the water are regulated via either one or a range of knobs (in extra expensive showers). Although temperature control is much easier in hands-on mixer types, they are a lot more expensive than the previously discussed mixers. They additionally call for additional plumbing of hot and cold water system pipelines.

  • Thermostatic Mixer: The tube as well as spray of this shower kind belong of the wall unit and also the hot and cold water products are connected to a single shutoff here also. It is total with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from coming to be too warm. One of the largest benefits of a thermostatic mixer shower type consists of convenient temperature level control. However, it is one of the most costly of the different mixer choices.

  • Power Shower: A power shower is a solitary unit consisting of a powerful electrical pump that can changing both the water pressure and also temperature. This type of shower can be fitted if there is water from a cold water cistern and also a hot water cylinder. A power shower makes the change of both pressure and also temperature level easy. On the other hand, it is unsuitable for water heated up straight by the shower or where the water is provided by a mix boiler under mains stress.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it heats up the water electrically. It is necessary to keep in mind that for this shower type to be mounted, the mains pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature and also pressure to be changed using a handle. Versions with temperature level stabilisers are better as they remain untouched by other taps somewhere else in use within the family. A significant downside of electrical showers is that the control handle just permits the option of heats at much less pressure, or lower temperature levels at a greater pressure. This is problematic in the winter season when the spray is usually weak as well as the keys water is cooler. However, this trouble is dealt with in some models which are readily available with a winter/summer setting.


  • Method


    Depending on the sort of shower you desire to set up, the shower head need to either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check shutoff.
    Before starting, it is advisable to note the settings of the shower head and control, as well as to plan the pipe-work entailed. In addition, the drain system to get rid of the drainage will certainly require to be planned. Both settings of the cable path and also the shower button will likewise need to be considered if an immediate or electrical shower system is being installed.
    Make use of the direction guide supplied with the shower device to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is important to cut off the supply of water. In order to safeguard the pipes, they ought to be provided a water resistant covering as well as likewise fitted with separating shutoffs. The pipelines can then be hidden into the wall and plastered over to neaten the total look.
    Fit the base tray, shower head, as well as fittings.
    Link the major shower control to the pipes that will certainly be supplying the water (This may call for a women screw string adapter).
    Reconnect the water system as well as examination the pipelines for any type of leaks, as some may need firm.
    If you are mounting an electrical shower, remember to switch off the electrical power supply before making any kind of electrical links. As soon as these connections have been made (there must be assistance within the instruction manual), the power supply can be switched back on.

    Readjusting Water Pressure to Fit Your Shower


    The cold water tank can be lifted to a better elevation (often just 150mm (6inches)) by fitting a strong wooden assistance underneath it - possibly composed of struts as well as blockboards. If you select this option, the main as well as circulation pipes will also have to be raised to meet the new elevation of the storage tank.
    Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is selected, it needs to be connected into the power supply in order to run.

    Piping as well as Drain


    It is best to use 15mm diameter supply pipes, and make the runs to the shower as brief and also straight as feasible so regarding maintain maximum stress as well as reduce warmth loss. Additionally, by reducing the use of elbows for pipe edges, you can reduce the resistance in the flow of the water. You can attain this by bending the pipelines rather.

    Many Common Errors


  • Breaking or overlooking regional code limitations.

  • Making use of pipelines that are also small.

  • Connecting copper to galvanized without making use of a brass or dielectric fitting in between the two.

  • Not using tape or pipe compound at threaded joints.

  • Uneven your components when mounting them.

  • Not installing an air space loading for fixtures.

  • Reducing supply stub outs too short to mount the shutoff valves onto after the completed wall is in area.

  • Not appropriately aligning tubes right into installations or stop shutoffs. (Forcing the nut onto the compression ring at an angle when the tubes goes to an angle will create a leakage.).

  • When turning the water back on in your home, always run the outdoors tube shutoff or purge your bathrooms to hemorrhage dust as well as air from the lines. This particles can create issues in your sink taps and also various other plumbing trim.



  • Most Popular Shower Enclosure Options to Upgrade Your Bathroom


    Frameless Shower Enclosures


    Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.



    Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.


    In-line Shower Options


    Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.



    You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.


    Semi-Frameless Shower Enclosures


    The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.



    Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.



    You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.


    Glass Block Shower Enclosure


    If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.



    You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.



    Final Thoughts



    Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

    https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/


    How to Build a Shower Enclosure for Your DIY Bathroom

    Do you appreciate reading up on How to Install a Direct-to-Stud Shower Enclosure? Try to leave a remark further down. We'd be pleased to see your reactions about this entry. Hoping that you come back again in the future. You should set aside a second to promote this blog entry if you liked it. Thanks so much for your time spent reading it.




    Book Appointment


    Report this page